|
Products code |
Filament Diameter (μm) |
Linear Density (tex) |
Compatible Resin |
Product Features & Application |
|
EWT530M
|
13 |
2400、4800
|
UP VE
|
Low fuzz Low static Good choppability Good dispersion For general use, to make insulation parts, profile, and structural part |
|
EWT535G |
16 |
Excellent dispersion and flow ability Excellent wet-through and water-resistance properties Designed for class A application |
Sheet molding compound (SMC) is a high-strength composite material comprising primarily a thermosetting resin, filler (s), and fiber reinforcement. The thermosetting resin is typically based on unsaturated polyester, vinyl ester.
The resin, filler and additives are mixed into a resin paste which is added onto a carrier film, and then the chopped glass strands are dropped on the resin paste. And another carrier-film supported resin paste layer is applied onto the fiberglass layer, creating the final sandwich structure (carrier film - paste - fiberglass - paste - carrier film). The SMC prepreg is transformed into often complex-shaped finished parts, creating a solid 3-D-shaped composite within a few minutes. The fiberglass significantly improves mechanical performance and dimension stability as well as the surface quality of the final part. Final SMC products are often used in the automotive industry.
1. Good choppability and anti-static
2. Good fiber dispersion
3. Multi-resin-compatible, like UP/VE
4. More strength, dimensional stability, and corrosion resistance of the composite product
6. Excellent electric (insulation) performance
1.Thermal resistance
2.Fire retardancy
3.Weight reduction
4.Excellent electrical performance
5.Low emissions
1.Electrical & Electronics
• Electrical connectors, shrouds, circuit breaker housings, and
contact blocks
• Motor mounts, brush cards, brush holders, and starter housings
• Electric switchgear
• Electrical insulator parts
• Electrical junction boxes
• Satellites Aerials / Dish Antennas
2.Automotive
• Air deflectors and spoilers
• Frames for windows/sunroofs
• Air-intake manifolds
• Front-end grill opening
• Battery casings and covers
• Headlamp housings
• Bumpers and bumper
• Heat shields (engine, transmission)
• Cylinder head covers
• Pillars (e.g. 'A' and 'C') and coverings
3.Appliances
• Oven end-panels
• Cabinets & Storage Boxes
• Kitchen Sinks
• Lids.
• Cutters
• Cooling Coli Drip Pans such as room air conditioners
4.Building & Construction
• Door Skins
• Fencing
• Roofing
• Window Panels
• Water Tanks
• Dust Bins
• Basins & Bath Tubs
5.Medical Devices
• Instrumentation covers, bases, and components
• Standard and contagious/biohazard trash cans and receptacles
• X-ray film containers
• Surgery equipment
• Antibacterial components
6.Military & Aerospace
7.Lighting
8.Safety & Security